 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTE3076 0.560 Inch, Seven Segment, w/Overflow and +, Common Anode, RHDP 1 Digit Features: D High Performance GaAsP D Large, easy to read digits D Fast switching - excellent for multiplexing D Low power consumption D Solid state reliability - long operation life D Rugged plastic construction D Directly compatible with integrated circuits D High brightness with high contrast D Low forward voltage D Wide viewing angle 150 Applications: D Digital readout displays D Instrument panels D Point of sale equipment D Digital clocks D Tv and radios Absolute Raximum Ratings: Power Dissipation at +25C ambient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 840mW Derate linearly from +25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -12.0mW/C Continuous Forward Current Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420mA Per Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Decimial Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Reverse Voltage Per Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Decimal Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Solsdering Time at 260C (Note 1,2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 sec. Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to +85C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to +85C Thermal Resistance Junction to Free Air, JA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160C/W Note 1. Leads of the device immersed to 1/16 inch from the body. Maximum device surface temperature is 140C. Note 2. For flux removal, Freon TF, Freon TE, Isoproponal or water may be used up to their boiling points. Operating Characteristics: (TA = +25C unless otherwise specified) Parameter Luminous Intensity, Digit Average Peak Emission Wavelength Spectral Line Half Width Forward Voltage Segment Decimal Point Dynamic Resistance Segment Decimal Point Capacitance Segment Decimal Point Reverse Current Segment Decimal Point Segment C or D of "+" V=0 Ipk = 100mA p IF = 20mA Test Conditions IF = 10mA (Note 3,4) Min 125 - - - - - - - - - - - Typ 420 650 20 - - 2 2 35 35 - - - Max - - - 2.0 2.0 - - 80 80 100 100 100 Unit cd nm nm V V pF pF A A A VR = 5.0V 5 0V Note 3. The digit average Luminous Intensity is obtained by summing the Luminous Intensity of each segment and dividing by the total number of segments. Intensity will not vary mopre than 33% between all segments within a digit. Note 4. The decimal point is designed to have the same surface brightness as the segments, therefore, the Luminous Intensity of the decimal point is .3 times the Luminous Intensity of the segments, since the area of the decimal point is .3 times the area of the average points. Pin Connection Diagram Cathode C (1) Cathode D (1) Cathode B (1) Cathode D.P. (1) Cathode E (2) Cathode D (2) Cathode G (2) Cathode C (2) Cathode D.P. (2) 1 2 3 4 5 6 7 8 9 18 N.C. 17 N.C. 16 N.C. 15 Cathode A (1) 14 Common Anode (1) 13 Common Anode (2) 12 Cathode F (2) 11 Cathode A (2) 10 Cathode B (2) .985 (25.0) .500 (12.7) .750 (19.05) A .560 (14.22) D A G D B C D.P. C B D.P. 8 Digit #1 .066 (1.67) Dia Pin 1 .315 (8.0) .060 (1.52) .155 (3.94) .010 (.254) .600 (15.24) .020 (.508) Typ .100 (2.54) Typ |
Price & Availability of NTE3076
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |